N0922L, N1322L, F1222L, F1522L
D Series Remote Low Side User Manual
October 2014
Page 17
.
Indicator Lights & Their Meanings
Light Actions
Power
Status
Water
De-Scale & Sanitize
Steady Green
Normal
Normal
-
-
Blinking Green
Self Test Failure
Switching on or
off. When Smart-
Board used,
machine attention
recommended.
-
-
Blinking Red
-
Diagnostic shut
down
Lack of water
-
Yellow
-
-
-
Time to descale and
sanitize
Blinking Yellow
-
-
-
In Cleaning Mode
Light Off
No power
Switched to Off
Normal
Normal
What to do before calling for service
Normal Operation
Ice
The machine will make either flaked or nugget ice,
depending upon the model. The ice will be produced
continuously until the bin is full.
Heat
Most heat is exhausted at the remote condensing unit
or at the rack; the ice machine should not generate
significant heat.
Noise
The ice machine will make noise when it is in ice
making mode. The gear reducer will produce sound.
Some ice making noise could also occur. These
noises are all normal for this machine.
Reasons the machine might shut itself off:
• Lack of water.
• Does not make ice
• Auger motor overloaded
• Controller self test failure.
Check the following:
1. Has the water supply to the ice machine or
building been shut off? If yes, the ice machine will
automatically restart within minutes after water begins
to flow to it.
2. Has power been shut off to the ice machine? If yes,
the ice machine will automatically restart when
power is restored.
3. Has someone shut the power off to the remote
condensing unit while the ice machine still had
power? If yes, the ice machine may need to be
manually reset.
To Manually Reset the machine.
•
Open the switch door
• Push and release the Off button.
• Push and release the On button.
To Shut the Machine Off:
1. Push and hold the Off button for 3 seconds or until
the machine stops
Open
Switch
Door
