2.8 – EMERGENCY DISARMING BY ELECTRONIC KEY
This disarming mode is used for “EMERGENCY DISARMING” (in case your remote control is lost
or not working) and “TOTAL DISARMING”. Touching the electronic key to its receptable disarms
and switches OFF the system which will not rearm by using the remote control.
2.9 – ALARM MEMORY
Five flashes of the turn indicators and five siren chirps upon disarming warn that the alarm has
been triggered in your absence. To identify the last cause of alarm, turn ignition key ON and count
the status LED flashes; they will indicate the last alarm detected.
The flash sequence will be repeated 3 times; to interrupt, turn ignition key “OFF”.
This product is guaranteed to be free from manufacturing defects for a period of 24 months from
the installation date shown on this warranty, in compliance with Directive 1999/44/CE.
Please fill-in entirely the guarantee certificate included in this booklet and do NOT REMOVE the
guarantee label from the device.
The warranty will become void if labels are missing or torn, if the installation certificate is not fully
compiled or if the enclosed sale document is missing.
The manufacturer declines any responsibility for eventual malfunctions of the device or any
damage to the vehicle electrical system due to improper installation, use or tampering.
This alarm system is solely intended to be a theft-deterrent device.
The present device does not fall within the scope of Directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE) as specified in art. 2.1 of L.D. no. 151 of 25/07/2005.
To restore normal operation, touch the electronic key once again to its receptacle.
A quick chirp and a flash of the status LED will confirm that the system has returned
in normal operation mode.
3.0 – WARRANTY CONDITIONS
4.0 – WASTE ELECTRICAL AND ELECTRONIC EQUIPTMENT (WEEE) DIRECTIVE
5.0 – TECHNICAL SPECIFICATIONS
PAGE
04
PAGE
05
PAGE
06
PAGE
07
PAGE
08
PAGE
09
PAGE
10
PAGE
11
PAGE
04
PAGE
13
PAGE
05
NOTES
