background image

USER MANUAL 

 

2.1 – COMPLETE SYSTEM ARMING 

Press the lock button on the vehicle original remote control; arming is confirmed by a siren chirp and a 
flash of the turn indicators.

 

The system has a 30” pre-arming delay time indicated by the LED turned 

ON steady.

 

2.2 – SYSTEM ARMING WITH SENSOR AND CONFORT EXCLUSION 

To arm the system and exclude the internal volumetric protection, external sensors (infrared wireless) 
and comfort feature, proceed as follows:

 

• Make sure the system is disarmed and ignition key “OFF”.
• Insert the electronic key into the specific receptacle; the LED will flash quickly.
• Close vehicle doors and press the lock button on the original remote control.
• System activation is confirmed by a low tone acoustic signal and a flash of the turn indicators.

2.3 – PASSIVE ARMING 

When passive arming is configured, the system automatically arms approx. 60” after ignition is 
switched off and after the last door is opened and closed.

 

System activation is confirmed by the 

standard optical/acoustic signal. 

2.4 – ARMING DELAY 

During the 30” inhibition time after arming (LED ON steady), you can exit the vehicle without 
triggering any alarm. 

2.5 – SYSTEM ARMED 

After the delay time the system is armed and ready to detect any theft attempt. When the system is 
fully armed, the LED flashes.

 

2.6 – ALARM, INHIBIT TIME BETWEEN ALARMS AND ALARM CYCLES 

Theft attempts are indicated by acoustic/optical signals. An alarm event can generate up to ten 30 
second alarm cycles for each input and for each arming cycle. There is a 5 second delay between 
each cycle. 

2.7 – SYSTEM DISARMING 

Press the unlock button on the vehicle original remote control. Disarming is confirmed by 2 siren 
chirps and 2 flashes of the turn indicators. Five acoustic signals and five flashes of the turn 
indicators warn there has been an alarm condition prior to disarming (par. 2.9 lists the various 
alarm causes and relative LED signals). 

 

 

 

 

 

 

1.0 

- INTRODUCTORY NOTE………………………………………………………………......PAGE 

USER MANUAL 

2.0

 - OPERATING PROCEDURE.............................................................................................PAGE  

  2.1 – Complete system arming..............................................................................................PAGE  
  2.2 - System arming with sensor and comfort exclusion...................................................... 
  2.3 - Passive arming..............................................................................................................PAGE  
  2.4 - Arming delay..................................................................................................................PAGE  
  2.5 - System armed.........................................................................................................PAGE 03 
  2.6 - Alarm, inhibit time between alarms and alarm cycles....................................................PAGE   

  2.7 - System disarming..........................................................................................................  
  2.8 - Emergency disarming by electronic key....................................................................... 
  2.9 - Alarm memory..............................................................................................................PAGE 

3.0

 – WARRANTY CONDITIONS…………………………………………………………………. 

4.0

 – WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE……….. 

5.0

 – TECHNICAL SPECIFICATIONS……………………………………………………………… 

Dear customer, thank you for purchasing the S36 alarm system. The following symbols are 
included in the present annual to emphasize important instructions or particular functions or 
connections: 

TABLE OF CONENTS 

1.0 – INTRODUCTORY NOTE 

Exclusion of sensors and comfort feature is bound to each single arming cycle.

 

If passive arming is enabled, internal sensors and comfort output (automatic 

window roll-up) are excluded. Opening a door 60” before the system is armed 

causes the procedure to interrupt; it will resume once the door is closed. 

2.0 – OPERATING PROCEDURE 

PAGE 02 

PAGE 03 
PAGE 03 
PAGE 03 
PAGE 03     
PAGE 03 
PAGE 03 
PAGE 03     
PAGE 03 
PAGE 04 
PAGE 04 
PAGE 04 
PAGE 04 
PAGE 04 

PAGE

 

02

 

PAGE

 

03

 

For the user. 

This sign highlights useful information. 

Reviews: