Page 3
Page 2
For more information and support visit: http://bit.ly/75903_alarm
0.9-INCH BLUE LED
ALARM CLOCK
POWER UP
1. Insert the 120 volt power cord into an outlet.
Optional:
Insert 1 “9V” battery (sold separately) for backup.
2. The Time Display will flash 12:00, an indication to set the time.
TIME SETTING
Continuously hold down the TIME button while setting your
hour and minutes.
1. While holding the TIME button, press the HOUR button
to set your hour.
Note:
The PM Indicator will appear when
you advance to PM time.
2. While holding the TIME button, press the MINUTE button
to set your minutes.
3. When the correct time is shown on the display, release
the TIME button.
ALARM TIME SETTING & OPERATION
Continuously hold down the ALARM button while setting your
alarm hour and minutes.
1. While holding the ALARM button, press the HOUR button
to set your alarm hour.
Note:
The PM Indicator will appear
when you advance to PM time.
2. While holding the ALARM button, press the MINUTE button
to set your alarm minutes.
3. When the correct alarm time is shown on the display, release
the ALARM button.
4. Move the Alarm ON/OFF Switch to the ON position to turn
the alarm on.
Note:
The Alarm Indicator will appear when
the alarm is on.
5. To turn off a sounding alarm, move the Alarm ON/OFF Switch to
the OFF position.
SNOOZE
When alarm sounds, press the SNOOZE button to silence alarm for
8 minutes. Snooze function can be repeated many times if desired.
BATTERY BACKUP
• Insert 1 “9V” battery (sold separately) into the Battery
Compartment on the bottom of the clock. This will keep
your time and alarm settings saved until power is restored.
• The LED display will not light-up, but the alarm will still sound
at the preset alarm time.
Note:
If there is no battery installed and the power is interrupted,
the display will flash 12:00 and the time and/or alarm will need
to be set again.
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback
on our
La Crosse Technology
social media outlets!
POWER REQUIREMENTS & DIMENSIONS
Power:
120V Power Cord
Battery Backup:
“9V” battery (sold separately)
Dimensions:
3.45" L x 5.50" W x 2.15" H
8.76 cm L x 13.97 cm W x 5.46 cm H
off on
-
hour minute time alarm
alarm
PM Indicator
Time Display
Alarm
ON/OFF
Switch
Alarm
Alarm Indicator
Hour
Minute
Time
PM
MODEL: 75903
DC: 032321
