SCOLTA RP-101, Instruction Manual

Page: 19 / 28

19
Dial
If DTMF is used, one of the max. 16 programmable DTMF codes has to be
assigned.
SP Unmute
This setting determines when the squelch will open, i.e. when the speaker
will unmute. There are 4 settings available.
WAVE : signal regardless of any codes (CTCSS/DCS or DTMF)
CT / DQT: signal with the proper CTCSS/DCS code.
QD or Opt: signal with the proper CTCSS/DCS code OR DTMF code.
QD and Opt: signal with the proper CTCSS/DCS code AND DTMF code.
DTMF
The DTMF function must be programmed by software. With its decoding
and encoding features, DTMF can be used as a selective calling system.
The automatic transmission of DTMF (PTT ID) codes and the STUN
function (which enables remote transmission to be disabled) are also
available.
Each DTMF encode can contain a maximum of 16 symbols (0-9 and A-F).
The maximal 16 DTMF calling codes can be programmed via software in
the Auto Dial List.
For the PTT-ID feature - automatic transmission of a DTMF call upon
pushing or releasing the PTT key - 2 PTT-ID codes can be programmed
(beginning of transmission and end of transmission).
The DTMF radio ID decode can be composed of a maximum of 10 symbols
(0-9 and A-F). The usage of a group symbol (A-F) is enabled. Further, it is
possible to activate a warning tone that will be audible in the event of the
reception of a call.
The Stun functions allows to deactivate the transmission mode of a
remote radio. To activate a radio for this feauture, the stun code needs to
be assigned. Once this stun code is received, transmission is deactivated
(reception is still possible).
To revive a stunned radio, the stun code, followed by the letter F has to be
received.