SCOLTA RP-101, Instruction Manual

Page: 17 / 28

17
CHANNEL SETTINGS
The following options can be configured to each channel using software.
RX Freq / TX Freq
The radio has 199 programmable channels. The PMR version is
exclusively programmable with the 16 PMR frequencies (446 MHz).
The commercial versions UHF and VHF can be programmed in
the designated frequency band according to the individual licence.
For repeater operation, TX- and RX-frequencies are programmable
independently.
QT/DQT Dec - QT/DQT Enc
Some channels may have preset QT/DQT tones. A QT/DQT tone is a
subaudible tone which allows you to ignore (not hear) calls from other
parties who are using the same channel.
When you receive a signal that has a tone different from the one set up
in you transceiver, you will not hear the signal. Likewise, signals that
you transmit will only be heard by parties whose QT/DQT tone matches
the tone set up in your transceiver.
NOTA: Although using channels set up with QT/DQT tones relieves you from
listening to unwanted calls, it does not mean your calls will be private.
TX-Power Selectio
In the PMR version, the high power (HIGH) is 500 mW. For commercial
versions of VHF and UHF, the high and low settings can be
programmed according to the values assigned in the license.
Bandwidth (W/N)
In PMR version the bandwidth is set at 12.5 kHz (N) according to
government regulations. For commercial versions the bandwidth can be
N (12.5 kHz) and W (25 kHz)