SCOLTA RP-101, Instruction Manual

Page: 11 / 28

11
Installing the Antenna
Hold the antenna base and screw the antenna
clockwise into the antenna connector at the top of the
transceiver, until tighten.
NOTES :
• In PMR version the antenna is fixed, ie it can not be
removed from the device.
• Don’t hang keys, speaker or microphone on the antenna.
Otherwise the antenna will be damaged or performance of
the radio will be degraded.
Installing the Belt Clip
If necessary, can use two 3 x 8mm screws in the
package to fix the belt clip.
NOTES:
• If not install the belt clip, its installation location will
get hot in the hot environment or in the continuous
communication.
• You must remove the belt clip before removing the battery
pack.
Installing the Optional Speaker/
Microphone
Outward apart the moisture-proof rubber of the
headphone mouth, Insert the speaker/ microphone plugs
into the speaker/micro- phone jacks.
NOTAS:
• The transceiver is not fully waterproof while using the
speaker/microphone.
• The connection is compatible with Kenwood (3.5 / 2.5mm,
stereo / stereo) which can also be used as data transfer
cable
.