STC-7003
Telephone User Guide
3) Press STORE. “STORE NUMBER” will appear on the dis-
play.
4) Dial the telephone number to be stored, up to 22 digits. These
digits may be 0- 9 WXYZ, * , #, FLASH and PAUSE, each of
which is counted as one digit
5) Press the desired one-touch speed dial key (M1 ~ M9) to
store the dialed number in memory
6) To change a stored number, repeat the instructions above
and the new telephone number will replace the previously stored
number
Making calls with the One-Touch Speed Dial Keys (M1~ M9)
1) Pick up the handset or press SPKR and listen for dial tone.
2) Press the desired one-touch speed dial key M1~M9; the
stored number will be dialed automatically
Viewing Caller ID entries
The STC-7003 telephone stores Caller ID data for the last
60 calls received, including “UNAVAILABLE” and “BLOCKED”
calls
1) Press the Down toggle key to view calls starting with the
newest call.
2) Press the Up toggle key to view calls starting with the oldest
call.
3) Repeatedly press the Up or Down toggle key to scroll through
the call list as desired
Deleting entries from the Caller ID list
Deleting a single Caller ID entry:
1) Press the Up or Down toggle key as needed to select the
Caller ID entry to be deleted.
2) Press DEL. “DELETE CALL ? “ will be displayed on the
LCD.
3) To cancel without deleting the selected entry, press ? or ?
4) To continue deleting the selected caller ID entry, press DEL.
Deleting all Caller ID entries:
1) Press the Up or Down toggle key to display any caller ID
entry.
2) Press and hold DEL for at least 3 seconds, until the LCD
displays “ERASE ALL CALL?”
3) To cancel without deleting any calls, press either the Up or
Down toggle key
4) To continue deleting all entries, press DEL. All entries will be
deleted and “NO CALLS” will be displayed on the LCD.
30) Press Up or Down toggle to select LOCAL or PBX hold
mode of hold. The default mode is PBX.
31) Press SET to conrm and to select the SET FLASH TIME
menu. The default ash time is 600ms.
32) Press the Up or Down toggle key to select a ash time of
600MS, 300MS, 100MS.
33) Press SET to conrm and to select the SET PAUSE TIME
menu.
34) Press ? or ? to select a pause time of 2.2S or 3.6S. Default
pause time is 2.2s.
35) Press SET to conrm and exit user options setup.
Placing a call:
1) Lift the handset or press SPKR and listen for a dial tone.
2) Dial the desired telephone number using the keypad. Dialed
digits are displayed on the LCD as the number is dialed. After
15 seconds the dialed digits will be replaced by the call length
timer.
3) To end a call, place the handset on the telephone base unit,
or if using the hands-free speakerphone, press the SPKR key.
The call time length will remain on the display for 5 seconds,
and then the display will revert to the standby display mode.
Placing a call on hold (local hold mode)
a. Using handset/headset: Press HOLD, then place the handset
in its cradle.
b. Using speakerphone: Press HOLD.
Retrieving a held call
a. Using handset/headset: Lift the handset from its cradle.
b. Using speakerphone: Press SPKR.
Last number redial
1) Lift the handset or press SPKR and listen for a dial tone.
2) Press RD. The last number dialed will be displayed and
dialed automatically.
Volume Adjustment
Press VOL repeatedly to adjust the handset/headset volume to
the desired level. One of three levels (low, medium, and high)
may be selected. To adjust the speakerphone volume, slide the
control on the right side of telephone.
Speed Dial Memory Key Programming and Dialing
Programming the One-Touch Speed Dial Keys (M1~M9):
1) Verify that the phone is on-hook, as speed-dial key program-
ming may only be performed with the telephone on-hook.
2) Remove the faceplate overlay to gain access to the program-
ming keys.
