7
7.Setting of parameter under the programme control mode
2.Every time the
“
Program
”
button is pressed, parameter symbol and number will be displayed
alternately on the screen, temperature(
℃
) and time(minute) have one decimal on display. Press the
“
Decrease
”
or
“
Increase
”
button to set the temperature and time parameter. Refer to the graph two
to see the operating process.
1.P.SLO
－
The starting time parameter of the programme
2.P.tr1
－
Heating time of the slope part of the first programme segment
3.P.SL1
－
The ending temperature of the slope part of the first programme segment
4.P.td1
－
Time of temperature retaining of the temperature retaining part of the first programme
segment
5.P.tr2
－
Heating time of the slope part of the second programme segment
6.P.SL2
－
The ending temperature of the second programme segment
7.P.td2
－
Time of temperature retaining of the temperature retaining part of the second programme
segment
The rest may be deduced by analogy
P.td9
－
Time of temperature retaining of the temperature retaining part of the ninth programme segment
P.Hb
－
Feedback value, condition for entering the retaining segment(
℃
, one decimal)
P.PLC
－
Cycle time(1
－
99)
