28
7.5.7 Enable/disable Digital Audio
Command
Function
Feedback Example
DigitAudioON[x].
Enable HDMI audio output of port x.
l
X=1~16, enable the port X.
l
X=17, enable all ports.
DigitAudio ON with
[x]
DigitAudioOFF[x].
Disable HDMI audio output of port
x.
l
X=1~16, disable the port X.
l
X=17, disable all ports.
DigitAudio OFF with
[x]
%9977.
Query the status of digital audio of output
channels.
Out 01 02 03 04
Audio Y Y Y Y Out
05 06 07 08
Audio Y Y Y Y Out
09 10 11 12
Audio Y Y Y Y Out
13 14 15 16
Audio Y Y Y Y
7.5.8 Control Far-end Device
Command
Function
Feedback Example
/+[Y]/[X]:******.
Set communication between PC and
Receivers.
①
Y is for RS232 port (connect with
RS232 port of HDBaseT
Receiver)
Y= 1~14 or A~N, The value of Y
is defined into the following
meanings (in a given baud rate
depended by the value of X):
a.
Y = 1~14, send this command to
the corresponding HDBaseT
Receiver to control far-end
device.
b.
Y = 15, send this command to all
HDBaseT Receivers to control all
far-end devices.
c.
Y = A~N, under PWON mode,
send this command to the
corresponding HDBaseT
Receivers to control far-end
device.
******
SC38.MX16
Scion Tech
User Manual
Tel: +44 (0) 1635 862484
www.scion-tech.co.uk
