2.0 User Interface Receivers
2.1
PRO-6001
RJ45 to Scart Plug
Using the 3.5mm mono jack cable provided, connect the (PRO-6003) IR detector to the receiver.
Ensure that both ends of the cable are fully inserted and that it is free from any sharp objects. Connect
the CAT5 patch cable and ensure that both LED's are illuminated and NOT flashing. Should the LED's
begin to flash, remove the CAT5 cable to prevent damage to the receiver and PRO-1001 unit. See
section 1.6 for more details.
One the PRO-6001 is connected and the LED's remain on, the receiver can be inserted in to the scart
socket of your display. The PRO-6001 applies power to the status pin (8) of your display forces the
display in to AV mode.
2.2
PRO-6004
RJ45 to RCA Phono
Using the 3.5mm mono jack cable provided, connect the (PRO-6003) IR detector to the receiver.
Ensure that both ends of the cable are fully inserted and that it is free from any sharp objects. Connect
the CAT5 patch cable and ensure that both LED's are illuminated and NOT flashing. Should the LED's
begin to flash, remove the CAT5 cable to prevent damage to the receiver and PRO-1001 unit. See
section 1.8 for more details.
One the PRO-6001 is connected and the LED's remain on, the receiver can be connected to your
display via the RCA connectors.
