1.0 PRO-1001 Installation
1.1 Installation and ventilation
The PRO-1001 series maybe installed with or without rack mounting ears supplied. It is
recommended that the chassis has at least 1RU space above and below for ventilation purposes.
As this is not always possible it is recommended that a CAT5 patch panel, cable management
panel or blank panel is used to create the airflow.
[ CAT5 Patch, Cable Management, Blank Panel or Space ]
Ventilation
Ventilation
1.2 Connecting the power
Once mounted and secured in your chosen location, power should be applied using the desktop
power supply provided. When the unit is first switched on the green LED indicators will illuminate
and the amber LED's will illuminate in a sequence from left to right. Once all LED's are illuminated
the PRO-1001 is ready to use.
1.3 Connecting the signal inputs
RCA Phono sockets are provided on the rear panel for video and audio inputs.
●
Composite video is required for all 16 inputs and should be 1 volt p-p
●
Line level (0dB) audio is required at 20KHz
When using Scart to RCA Phono cables it is important to check the IN/OUT configuration of the
cable. The PRO-1001 requires a Scart OUT cable to function.
When planning your headend installation, it is useful to have a small TV or monitor in the cabinet for
local viewing during installation and support. If there is a spare CAT5 port available, this local monitor
could be user 32. This will enable viewing of all 16 inputs without removing or installing additional cables,
or dismantling the install during support.
