SCINTREX ENVI-MAG Manual Download

Page: 73 / 265

Operating displays

ENVI-MAG Manual

A3-41

Instrument

Notes display

The notes display is useful for the entry of comments, which are stored with the
data at the particular Line and Station number.

Macros

(pre-recorded messages) provide a quick entry for repetitive notes which

can be entered while measuring. This display is accessible with the “NOTE” key.

NOTES: #nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

MACROS:

1: ccccccccccccccc 2: ccccccccccccccc

3: ccccccccccccccc 4: ccccccccccccccc

5: ccccccccccccccc

Chg?:ENT.

BATT:bbb

Figure A-33

The NOTES display.

Parameter

Description

NOTES

Alpha-numeric characters, including "

","

" and "

up to 32 characters

A note can be saved as one of five macros in a
separate memory for re-use.

MACROS

...

MACROS are pre-recorded messages of up to 15
characters. These are used to speed up note entry.
It is most advantageous to enter frequently encoun-
tered items, such as

road

fence

, and so on.

Summary of Contents for ENVI-MAG










































































































































































































































































Search results

Summary of Contents for ENVI-MAG

Reviews:

Related manuals for ENVI-MAG

Brands by name

Popular brands

SCINTREX ENVI-MAG, Manual

Search results

Summary of Contents for ENVI-MAG

Reviews:

Related manuals for ENVI-MAG

Brands by name

Popular brands