manualshive.com logo in svg

SCINTREX ENVI-MAG, Manual

The SCINTREX ENVI-MAG manual is available for download, free of charge, from our website. This comprehensive user manual provides detailed instructions and valuable insights to maximize the potential of your ENVI-MAG device. Stay informed and optimize your experience by accessing the manual at manualshive.com.

Share
Download
background image

Installation procedure

ENVI-MAG

 

Manual

 

C2-3

Installation

Note:

You must ensure that all disks have been installed. It does not hurt to 
install the same disk twice, but problems will result if not all disks 
are installed.

The program files are stored on the installation disks as compressed files with a

 

.ZIP

 extension. The installation procedure expands these files and places them 

in the destination directory.

STEP 2: Product registration

During the installation, you will be required to enter:

▲

your name,

▲

your company name,

▲

the city and country in which the licensed computers are located.

This information comprises your user identification and is recorded permanently on 
the 

INSTALLATION DISK

 for future reference. Once recorded, it 

cannot

 be changed.

Note:

Store the 

INSTALLATION DISK

 in a safe place!

▲

Should your ENVIMAP files ever be erased, they can only be recovered 
by running your 

original

 

INSTALLATION DISK

 in drive 

A:

 (or 

B:

), 

exactly the way you did before in “STEP 1: Running the 

INSTALL

 

program” on page C2-2. However, this time you will 

not

 be asked for the 

product registration details, since they have already been recorded.

STEP 3: System configuration

After all the files have been expanded and installed, the installation procedure 
will automatically run your copy of ENVIMAP. You will be presented with the 
following installation menu:

Summary of Contents for ENVI-MAG










































































































































































































































































Reviews:

No comments

Related manuals for ENVI-MAG

VeEX FX20 Quick Manual preview
FX20
Brand: VeEX Pages: 2
C-LOGIC 8900 Instruction Manual preview
8900
Brand: C-LOGIC Pages: 4
C-lock GreenFeed Instruction Manual preview
GreenFeed
Brand: C-lock Pages: 32
C-LOGIC 8730 Instruction Manual preview
8730
Brand: C-LOGIC Pages: 12
Keithley TEC SourceMeter 2510 User Manual preview
TEC SourceMeter 2510
Brand: Keithley Pages: 244
Kawai KX1000 Owner'S Manual preview
KX1000
Brand: Kawai Pages: 112
G-Tek 62 Series Operating Manual preview
62 Series
Brand: G-Tek Pages: 83
Nagano Keiki GC31 Instruction Manual preview
GC31
Brand: Nagano Keiki Pages: 25
Opus-Two Instrument Control System User Manual preview
Instrument Control System
Brand: Opus-Two Pages: 8
YATO YT-72977 Manual preview
YT-72977
Brand: YATO Pages: 36
Aqualytic AL250T-IR Instruction Manual preview
AL250T-IR
Brand: Aqualytic Pages: 140
Qonnex 2-WIRE EMM.630CT-MID Quick Start preview
2-WIRE EMM.630CT-MID
Brand: Qonnex Pages: 2
Sonel CMP-400 User Manual preview
CMP-400
Brand: Sonel Pages: 84
Ocean Optics CHEM2000-UV-VIS Operating Manual And User Manual preview
CHEM2000-UV-VIS
Brand: Ocean Optics Pages: 42
Fresh Roast Systems ColorTrack Genesis User Reference Manual preview
ColorTrack Genesis
Brand: Fresh Roast Systems Pages: 9
BAPI ZPS-ACC07 Installation And Operation Instructions preview
ZPS-ACC07
Brand: BAPI Pages: 3
Technics SXP30 - ELECTRONIC PIANO Owner'S Manual preview
SXP30 - ELECTRONIC PIANO
Brand: Technics Pages: 12
Texmate DL-40JANUS Quick Start Manual preview
DL-40JANUS
Brand: Texmate Pages: 18

Brands by name

Popular brands

Load more brands