24|
6.0 Troubleshooting
6
.0
Troubleshooting
6.1 No movement of the galvos
•
Check Scientifica logo is illuminated on the front of the rack
•
Check flying leads from galvos are plugged into correct
connectors on control box
•
Check all other cables including drive BNC and signal
connectors for damage or loose connections.
6.2 Misalignment of the laser to the Scanhead
If you suspect misalignment of the laser to the Scanhead consult section
3.3 Optical setup of the Scanhead and follow the procedure outlined for
optimal alignment.
