1 Important Information
Page 4
STAT
MATIC
smart 1,2,3
EN
Intended use
•
The STAT
MATIC
smart is a cleaning and maintenance system used for the machine-based treatment (internal cleaning
and maintenance) of dental turbines as well as regular and contra-angle handpieces.
•
Refer to the manufacturer instructions for further information on the suitability of certain instruments for cleaning and
maintenance purposes.
The STAT
MATIC
smart treatment is restricted to the internal cleaning of the instruments. The outer surfaces of the
instruments have to be cleaned manually or using machines prior to any internal cleaning. Following treatment with the
cleaning and maintenance system, continue treating the instrument immediately afterwards and in accordance with the
manufacturer's instructions.
NOTE:
For all preceding and subsequent processing steps, the RKI guidelines as well as the Medical Products Law must
be observed (applicable only for Germany).
Misuse
All applications not listed as part of the intend use constitute a case of misuse and may lead to damage to the device and
the medical products to be reprocessed and/or a potential danger to the operator himself. SciCan shall accept no liability
in such an event.
Disposal
Consumables
Any waste resulting from use of the device have to be disposed of or recycled without presenting a danger to human
beings or the environment while existing national regulations must also be observed in this regard.
Devices and accessories after use
Based on EU Directive (WEEE 2012/19/EU) on waste electrical and electronic equipment we hereby inform you that this
product is subject to the aforementioned directive and must be disposed of through special channels.
Contact the manufacturer or dental supply shop for further information.
This product must be disposed of or recycled without presenting a danger to human beings or the environment while
existing national regulations must also be observed in this regard.
