• An adult should
ALWAYS
perform the following checklist before every ride, for the safety of your child and
to keep the StingRay Electric in good working order.
• If you find any damaged or worn parts,
DO NOT
use the StingRay Electric. Refer to "Service and
Repairs" on page 5 to order new parts or find an authorized repair center.
• Inspect the entire StingRay Electric, looking for any broken or loose parts.
• Make sure the StingRay Electric does not have caked mud, brush, grass or excessive dirt in moving parts
(Brakes, drive chain, etc.). Refer to "Cleaning" on page 14 for instructions on how to wash your StingRay
Electric.
• Make sure tires are inflated to 30 psi, and that there are no cuts, punctures or excessively worn tread.
Refer to "Tire Maintenance" on page 15 for instructions about tire maintenance.
• Make sure that all four nuts on wheels are tight.
• Test brake lever to make sure it releases properly. Squeeze brake lever and make sure the StingRay
Electric cannot be pushed forward.
NEVER
allow the StingRay Electric to be used if brake lever is not
functioning properly.
BEFORE EVERY RIDE
13
WARNING
• Failure to inspect the StingRay Electric before operating it can be hazardous, increasing chances
of an accident or damage to the StingRay Electric.
ALWAYS
inspect the StingRay Electric before
each ride to make sure it is in safe operating condition.
• ALWAYS
perform regular maintenance on the StingRay Electric see "Care and Maintenance"
section, pages 14-21.