45
Replace the Drive Chain
on the Schwinn
®
IC2 Bike
Skill Level: III
8003629.070118.B
Replacement Procedure
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. [email protected] | © 2013 Nautilus, Inc.
NOTICE:
This document provides instructions for the replacement of the Drive Chain on the Schwinn
®
IC2 Bike.
If you need assistance, please call
Schwinn
Customer Service at 1-800-605-3369.
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and
understand all Warnings on this machine.
Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand
all Warnings on this machine.
• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and
safety warnings could cause injury to the service technician or bystanders.
• Keep bystanders and children away from the product being serviced at all times.
• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.
• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do
maintenance steps involving these components. Do not try to do heavy or awkward steps on your own.
• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine re-
placement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.
• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when
doing maintenance or replacing components. If necessary request replacement warning stickers or placards from Nautilus
customer service.
• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.
• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested
for correct performance.
Tools Required (not included)
Pedal
wrench
15
mm
Wrench
10
mm
Wrench
#2
Phillips
screwdriver
15
mm
Socket
and
Wrench
Flathead
screwdriver
Tape or marking pen
