background image

3

!

This icon means a potentially hazardous situation which, if not avoided, 

could result in death or serious injury.

Obey the following warnings:

!

Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.

• 

Keep bystanders and children away from the product you are assembling at all times.

• 

Do not connect power supply to the machine until instructed to do so.

• 

Do not assemble this machine outdoors or in a wet or moist location.

• 

Make sure assembly is done in an appropriate work space away from foot traffic and 

exposure to bystanders.

• 

Some components of the machine can be heavy or awkward. Use a second person 

when doing the assembly steps involving these parts. Do not do steps that involve 

heavy lifting or awkward movements on your own.

• 

Set up this machine on a solid, level, horizontal surface.

• 

Do not try to change the design or functionality of this machine. This could 

compromise the safety of this machine and will void the warranty.

• 

If replacement parts are necessary, use only genuine Nautilus replacement parts and 

hardware. Failure to use genuine replacement parts can cause a risk to users, keep 

the machine from operating correctly and void the warranty.

• 

Do not use until the machine has been fully assembled and inspected for correct 

performance in accordance with the Manual.

• 

Read and understand the complete Manual supplied with this machine before first use. 

Keep the Manual for future reference.

• 

Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or 

incorrect function.

• 

SAVE THESE INSTRUCTIONS.

Before using this equipment, obey the following warnings:

!

Read and understand the complete Manual. Keep the Manual for future 

reference.
 Read and understand all warnings on this machine. If at any time the Warning 

labels become loose, unreadable or dislodged, contact Nautilus Customer 

Service for replacement labels.

• 

Children must not be let on or near to this machine. Moving parts and other features of 

the machine can be dangerous to children.

• 

Not intended for use by anyone under 14 years of age.

• 

Consult a physician before you start an exercise program. Stop exercising if you feel 

pain or tightness in your chest, become short of breath, or feel faint. Contact your 

doctor before you use the machine again. Use the values calculated or measured by 

the machine’s computer for reference purposes only.

• 

Before each use, examine this machine for loose parts or signs of wear. Do not use 

if found in this condition. Monitor the Seat, Pedals, and Crank Arms closely. Contact 

Nautilus Customer Service for repair information.

• 

Maximum user weight limit: 300 lbs. (136 kg). Do not use if you are over this weight.

Important Safety Instructions 

Summary of Contents for Classic Cruiser

































Reviews: