Schwinn Classic Cruiser, Assembly & Owners Manual

Page: 27 / 32

27
Condition/Problem Things to Check Solution
Console shuts off
(enters sleep mode)
while in use
Check electrical (wall)
outlet
Make sure unit is plugged into a
functioning wall outlet.
Check connection at unit Connection should be secure and
undamaged. Replace adapter or
connection at unit if either are dam-
aged.
Check data cable integrity All wires in the cable should be
intact. If any are cut or crimped,
replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely
and oriented properly.
Reset Machine Unplug unit from electrical outlet for
3 minutes. Reconnect to outlet.
Check magnet position
(requires shroud removal)
Magnets should be in place on pul-
ley.
Check Speed Sensor
(requires shroud removal)
Speed sensor should be aligned with
magnet and connected to data cable.
Realign sensor if necessary. Replace
if there is any damage to the sensor
or the connecting wire.
Unit rocks/does not
sit level
Check leveler adjustment Adjust levelers until bike is level.
Check surface under unit Adjustment may not be able to
compensate for extremely uneven
surfaces. Move bike to level area.
Pedals loose/unit
difficult to pedal
Check pedal to crank arm
connection
Pedal should be tightened securely
to crank. Insure connection is not
cross-threaded.
Check crank arm to axle
connection
Crank should be tightened securely
to axle. Be sure cranks are connect-
ed at 180 degrees from each other.
Clicking sound
when pedaling
Check pedal to crank arm
connection
Remove pedals. Make sure there is
no debris on threads, and reinstall
the pedals
Seat or handlebar
post movement
Check adjustment lever Be sure lever is securely tightened.