Schwinn 150 Upright Bike, Assembly Manual

Page: 44 / 48

44
Condition/Problem Things to Check Solution
Console shuts off (enters
sleep mode) while in use
Check electrical (wall)
outlet Make sure unit is plugged into a func-
tioning wall outlet.
Check connection at rear
of unit Connection should be secure and un-
damaged. Replace adapter or connec-
tion at unit if either are damaged.
Check data cable integrity All wires in the cable should be intact. If
any are cut or crimped, replace cable.
Check data cable
connections/orientation Be sure cable is connected securely
and oriented properly. Small latch on
connector should line up and snap into
place.
Reset Machine Unplug unit from electrical outlet for 3
minutes. Reconnect to outlet.
Check magnet position
(requires shroud removal)
Magnet should be in place on pulley.
Check Speed Sensor
Contact Customer Care for further
assistance.
Fan will not turn on or will
not turn off Check data cable integrity All wires in cable should be intact. If any
are cut or crimped, replace cable.
Check data cable
connections/orientation Be sure cable is connected securely
and oriented properly. Small latch on
connector should line up and snap into
place.
Reset Machine Unplug unit from electrical outlet for 3
minutes. Reconnect to outlet.