80
6.
Carefully disconnect the Heart Rate Cables.
7.
Using a 4mm hex wrench, remove the bolts from the bracket arms at
the front of the Seat Frame. Using a 6mm hex wrench, remove the 4 bolts
from the back of the Seat Frame. Remove the Seat Frame Assembly. Set
the hardware and Seat Frame Assembly safely aside.
NOTICE:
Be sure not to pinch or cut any cables. This step may
require two people.
8.
Using a #2 Phillips screwdriver, loosen and remove the screw that
secures the front Seat Rail End Cap. Bend the edges of the rear Seat
Rail End Cap to disengage the inside tabs from the Main Assembly, and
remove. Set the hardware and Caps safely aside for reassembly.
9.
Using a #2 Phillips screwdriver, remove the screws (indicated) that
secure the Left Rear Shroud. Remove the bottom screws first, and then
the top screws. Slowly remove the Left Shroud. Set the hardware and Left
Shroud safely aside for reassembly.
*
*
*
4mm
X2
*
*
*
6mm
X4
