63
11.
Connect the cables to the back of the Console and attach the Console
to the Console Mast with the screws from Step 2.
NOTICE:
Do not pinch or cut the cables. Align the clips on the cable
connectors and make sure the connectors lock.
X4
12.
Installation is the reverse procedure.
Note:
Do not pinch or cut the cables.
13.
Discard the old parts according to your local guidelines and
regulations.
14. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
