79
Note:
Your machine may not match the image. For reference only.
1.
Remove the Seat Adjustment Handle from the seat slider assembly.
Set the Seat Adjustment Handle safely aside for reassembly.
2.
Carefully remove the Top Cap from the seat slider bracket, and
disconnect the Heart Rate Cables.
3.
Using a #2 Phillips Screwdriver, loosen and remove the hardware that
attaches the padded Seat Bottom to the Seat Frame Assembly. Set the
hardware safely aside for reassembly.
Disconnect all power to the machine before you service it.
X8
4mm
*
*
*
*
X4
#2
*
*
4.
Remove the Seat Bottom from the Seat Frame
Assembly and set it safely aside.
5.
Using a 4mm hex wrench, loosen and remove the
hardware that attaches the Seat Back to the Seat Frame
assembly, and remove the Seat Back. Set the Seat Back
and hardware safely aside.
NOTICE:
This step may require two people.
