Solar Energy Systems 01.09.2009
Page
8
Mounting Directions for In-Roof Photovoltaic Systems
Ernst Schweizer AG, Metallbau, CH-8908 Hedingen, T41 44 763 61 11, T41 44 763 61 19, www.schweizer-metallbau.ch
3.2 Solrif
®
-framed photovoltaic modules
Solrif
®
-framed modules consist of standard modules mounted with special Solrif
®
profile frames and sealed
watertight.
The profile frames of adjoining modules fit neatly together, thus forming the water runoff level of the roof. Along the
sides impermeability between the overlapping module edges is guaranteed by means of an additional rubber lip.
By roof slopes >10° the rainproof integration of the modules into the roofing is thereby possible in accordance with
guidelines set by the German Roofers’ Association (ZVDH).
Ready to mount Solrif
®
-framed photovoltaic modules for in-roof installation can be obtained by various means:
Solrif
®
frame kit with framing from Schweizer
Module manufacturers, wholesalers or partners of the Ernst Schweizer AG.
The modules have the following measurements:
Measurement
Lamination
measurement L x W
Framed module (mm)
(L+50) x (W+32)
Laying measurements
(mm)
(L+31) x W
Thickness (mm)
Ca. 34
Mass (kg)
Lami ca. 1.5 -
2.5
Table 3-1: Measurements of the photovoltaic modules
TIP
Please always consult the current data sheets for the exact specifications of framed modules.
