schweisskraft VarioProtect XXL-W TC AIR TH3, Operating Instructions Manual, Page: 3 / 28

Introduction
VarioProtect XXL-W TC AIR TH3 | Version 1.06 | EN 3
1 Introduction
With the purchase of the welding helmet from SCH -
WEISSKRAFT you have made a good choice.
Read the operating instructions carefully before
commissioning.
This provides information on the correct commissioning,
the intended use as well as the safe and efficient opera -
tion and maintenance of the welding helmet.
The operating instructions are part of the welding helmet.
It must always be kept at the place of use of the welding
helmet. In addition, the local accident prevention regula -
tions and general safety regulations for the area of appli -
cation of the welding helmet apply.
Illustrations in these operating instructions are for basic
understanding and may differ from the actual version.
1.1 Copyright
The contents of these instructions are protected by copy -
right and are the sole property of Stürmer Maschinen
GmbH. Their use is permitted within the scope of the use
of the automatic welding helmet. Any other use is not
permitted without the written consent of the manufac -
turer.
Passing on and copying of this document, utilization and
communication of its contents are prohibited unless ex -
pressly permitted. We register trademark, patent and de -
sign rights for the protection of our products, insofar as
this is possible in individual cases. We emphatically op -
pose any infringement of our intellectual property.
1.2 Customer service
If you have any questions about your Automatic welding
helmet or for technical information, please contact your
specialist dealer. They will be happy to provide you with
expert advice and information.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair-Service:
Fax: 0951 96555-111
Email: service@stuermer-maschinen.de
Spare parts order :
Fax: 0951 96555-119
Email: ersatzteile@stuermer-maschinen.de
We are always interested in information and experiences
that result from the application and that can be valuable
for improving our products.
1.3 Limitation of liability
All information and instructions in the operating instruc -
tions have been compiled taking into account the appli -
cable standards and regulations, the state of the art and
our many years of knowledge and experience.
The manufacturer assumes no liability for damage in the
following cases:
- Non-observance of the operating instructions,
- Improper use,
- Use of untrained personnel,
- Unauthorized modifications,
- Technical changes,
- Use of unauthorized spare parts.
The actual scope of delivery may deviate from the expla -
nations and illustrations described here in the case of
special designs, when using additional order options or
due to the latest technical changes.
The obligations agreed in the delivery contract, the gen -
eral terms and conditions as well as the delivery condi -
tions of the manufacturer and the legal regulations valid
at the time of the conclusion of the contract apply.
2 Safety
This section provides an overview of all important safety
packages for the protection of people and for safe and
trouble-free operation. Further task-related safety in -
structions are contained in the individual chapters.
2.1 Explanation of symbols
Safety instructions
Safety instructions are identified by symbols in these op -
erating instructions. The safety instructions are intro -
duced by signal words that express the extent of the haz -
ard.