background image

Page 27

>> 

CLEANING AND MAINTENANCE

DOOR REMOVAL
For easier access to the oven chamber for cleaning, 

it is possible to remove the oven door. To do so, 

open the oven door and tilt the safety catch part 

of the hinge upwards and toward you (fig. A). Close 

the oven door gently, lift and pull towards you. In 

order to refit the door back on to the oven, repeat 

process in reverse. When fitting, ensure that the 

notch of the hinge is correctly placed on the edge 

of the hinge holder. After the door is fitted to the 

oven, the safety catch should be carefully lowered 

down again. If the safety catch is not set it may 

cause damage to the hinge when closing the door.

A

Tilting the hinge safety catches

Cleaning the inner glass panel
1. First remove oven door.
2.  Using a Phillips head screwdriver gently undo the 

screws on the upper door slat, prying it gently on 

the sides (fig. C).

3. Pull the upper door slat loose. (fig. C, D)

B

C

B

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of Contents for IN10PYB





































Reviews: