Page 13
>>
OPERATION
LIGHT
The sensor operates independently and using it
does not affect other functions and settings..
The light in the oven turns on when:
• you touch — for 30 seconds.
• you touch and hold for 3 seconds , when you
use any heating function or a preset programme
— for 30 seconds.
• When “fast heat-up” completes — for 30 seconds.
• you open the door — until the door is closed,
but only for 10 minutes.
• Touch to turn off the light at any time.
• The sensor is inactive in standby mode.
COOLING FAN
Cooling fan operates independently of the
oven functions and the appliance status. Cooling
fan turns on when the oven chamber temperature
exceeds 50°C and turns off when it is below this
temperature.
THERMOSTAT
Thermostat symbol (next to the oven
temperature) indicates the operating status
of heating elements. When any of the heating
elements operates, the symbol lights up. The
symbol goes out, if none of the heating elements
operate (e.g. when the oven reaches the desired
temperature or the heating element temperature
drops).
HEATING FUNCTIONS
Touch symbol to select oven heating functions.
You can use the following controls when you are
in the heat function:
open pre-set programmes menu
(clear unconfirmed settings);
open timer menu (clear unconfirmed
settings);
to go back. (If you are on the main to screen
clear settings).
, navigate the menu;
OK
confirm settings.
If you do nothing for 20 seconds, settings are
cleared and the appliance enters standby mode.
The text display (left) shows the message “Select
heating function” and “>” will blink. Heating
functions are displayed sequentially or to
navigate.
The default function is Fan assisted heating.
In addition to accompanying functions, different
oven chamber outline symbols are display the
select heating functions. Touch or or to
select and then OK to confirm. Once your selection
is made, the default oven temperature flashes.
Touch or to adjust temperature and then OK
to confirm.
(If meat probe is detected, the appliance will ask
you to select its temperature. Touch or to
adjust default meat probe temperature of 80°C and
then OK to confirm. This step is omitted if no meat
probe is detected.)
Oven light is on switches, and you can use and
sensors. Other functions start after 5 seconds of
confirming.
THE DURATION symbol is displayed and time
display shows time that has elapsed. You can cancel
a heating programme at any time. By touching:
you can select pre-set programmes.
standby mode.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
