Page 16
>>
OPERATION
COOKING TIME DURATION
Timed operation involves setting the DURATION
after which the appliance automatically turns off.
You can set the duration from 1 minute to 10 hours.
Touch twice to adjust DURATION (KITCHEN TIMER
settings are shown first and then DURATION). The
symbol indicator flashes and “0:00” is shown
(or, if the function has been previously activated,
the remaining duration until the oven turns off).
Touch or to adjust settings. Touch or do
nothing for 5 seconds to abort and keep previous
settings or touch to confirm DURATION and
start countdown.
The symbol is shown. The symbol and END
TIME flash for 5 seconds, then the symbol goes
out and the display shows current time.
You can deactivate the timer by setting the
DURATION to 0:00.
Once duration has elapsed, you will hear an [end]
beep. All heating elements are disconnected.
You can silence the alarm as follows:
• touch any sensor once to reset all function
settings, temperatures and to turn on light
for 30 seconds.
• touch twice to set the new DURATION and
continue cooking with currently set temperature
and settings.
DELAY START
You can set the appliance, so that its timed
operation is delayed and cooking ends at a specific
time.
You must first set the DURATION (same as in timed
operation). Touch to confirm the set Duration.
The symbol lights up and starts flashing. The
display will show the END TIME (calculated as Start
Time + DURATION). Touch within 5 seconds
to move the End Time forward (and delay Start
Time). Touch or to adjust. Touch , or
do nothing for 5 seconds to abort or touch OK to
confirm. Once END TIME is confirmed the and
symbols light up steadily and the Current Time
is shown again. The and indicators are on during
the countdown to Start Time. Once the countdown
is complete, the symbol goes off and the
appliance turns on heating for the set DURATION.
Touch to view and modify DURATION.
Touch the sensor once to set the KITCHEN TIMER,
touch it again to set DURATION and touch it the
third time to set the END TIME. Set Duration to
0:00 to erase both DURATION and END TIME.
You can adjust END TIME from (current time
+ DU 1 minute) to (current time +
DU 10 hours). You can modify DURATION
(when END TIME is set) from 0:00 to (DU
Current Time + 1 minute).
Duration countdown
The appliance counts down DURATION. DURATION
is shown on the bottom line and accompanied by
the [duration symbol ]. DURATION is cleared
when the appliance is in standby.
During timed operation (pre-set programmes or
timer) the time remaining to the next stage is
shown (no symbol) i.e. the time remaining to
Start Time and to End Time. Touch and hold
for 3 seconds to view elapsed time. Touch and hold
for 3 seconds again to view remaining time.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
