Schwank SchwankAir 4000 Series, Instructions Manual

Page: 8 / 26

schwankgroup.com/schwankair
SchwankAir Controller
To add program step, select New program step.
Confirm your selection with the forward arrow.
Select Day, Night or Off [if the unit should not be in
operation], set the time for switch on and then for
which days the program applies, then go to End
to finish.
A new program step does not replace a set time
for Day for example, but you can instead select to
change a program step.
To change a program step, select Change
program.
The program steps that should not apply are
removed in Remove program. One or all program
steps can be removed in the menu.
To return to the factory set basic program, select
Reset all.
End Tue 10:45
Mon Tue Wed Thu Fri Sat Sun
Tue 10:45
Mon Tue Wed Thu Fri Sat Sun
New program step 7/16
Tue 10:45
00 :00
Mon Tue Wed Thu Fri Sat Sun
1. 08:00 Day
2. 18:00 Night
3. 10:00 Day
4. 16:00 Night Tue 10:45
Change program
>Installer menu>Week program
Check program
Change program
Remove program
End Tue 10:45
Mon Tue Wed Thu Fri Sat Sun
Tue 10:45
Mon Tue Wed Thu Fri Sat Sun
New program step 7/16
Tue 10:45
00 :00
Mode
Day
►
New program step 7/16
Tue 10:45
>Installer menu>Week program
Week program on/off
New program step
Check program
>Installer menu>Week program
Check program
Change program
Remove program
Remove program
Remove single
Remove all
Reset all
Fan speed increase
Settings for outdoor temperatures for max
respectively min speed during summer
respectively winter modes.
Factory setting
T max speed winter: 14°F [-22-59°F]
T min speed winter: 59°F [14-71°F]
T min speed summer: 71°F [59-98°F]
T max speed summer: 98°F [71-122°F]
Make settings for fan mode [see also Operating
modes section].
Fan settings
>Installer menu>Week program
Week program on/off
New program step
Check program
Week program on/off
• ON
>Installer menu>Week program
>Installer menu
Week program
Fan settings
Heating settings
>Installer menu>Fan settings
Week program
Fan settings
Heating settings
>Installer menu>Fan settings
>Fan speed increase
T max speed winter
T min speed winter
T min speed summer
Week program is activated by selecting On,
under Week program on/off. In On-mode, a sun,
moon or Off in the Status window appears to
indicate day, night respectively Off-function.