Schwank 40660000, Technical Manual

Page: 14 / 71

Revision: 3.0 Page 13 of 71
5.3.3. Info bar - status flags
All symbols are in fixed positions and indicate the current status of the symbol [active / inactive]. Active
symbols are colour-highlighted.
1st Symbol Switch-on optimisation [section 5.6.2]
P
Heaters are switched on earlier so that by switch-on time the setpoint
temperature has already been reached.
2nd Symbol Current regulated temperature [section 5.3]
Day
Day activated by digital input, only in automatic mode
OR Night
Night activated by digital input, only in automatic mode
OR Antifreeze
OR Holiday
OR Manual mode
3rd Symbol Automatic mode [section 5.3.1]
Inactive, i.e. all time programs are in the OFF state
Active, i.e. at least one of the assigned time programs is in the ON state
4th Symbol Heating time extension [section 5.6.1]
Heating time extension is active.
5th Symbol Humidity [section 5.3.2]
Heater request due to excessive humidity
6th Symbol Minimum times [section 8]
- No request due to minimum times
0 OR Minimum pause time is active
1 OR Minimum runtime is active