Schwamborn DSM 430, Translation Of The Original Operating Manual

Page: 16 / 52

EN Floor grinding machine DSM 430
2 Safety
16
All laws and regulations (e.g. the valid regula-
tions on waste disposal), accident prevention
guidelines and generally recognised safety rules
must be complied with when working on and
with the machine.
2.2 Safety instructions
This machine incorporates the very latest technologi-
cal innovations and has been built in accordance with
recognized safety regulations. This ensures that the
highest possible standards of occupational safety are
maintained. However, incorrect use of the machine
could endanger the health and lives of the personnel
or cause material damage.
The machine may only be operated by peo-
ple who have been assigned to do so and
who have the appropriate training and skills.
If any defects are found in the machine that
could endanger people or damage property,
stop the machine immediately and ensure
that it cannot be used again until all repairs
are completed.
The operating and maintenance personnel
responsible for the machine must ensure that
no one can enter the machine’s danger zone
during operation or maintenance work.
Risk of injury if safety devices have been
removed or are non-functional!
The safety fixtures must be checked for
completeness and function before starting
up. The safety fixtures must be mounted du-
ring operation.
The surfaces to be processed by the machine
need to be free of obstacles.
Risk of injury from rotating machine parts!
Limbs and clothing can be drawn in.
Proceed with the greatest care and caution!
When working on the machine (set--up, main-
tenance, service, repair, cleaning, etc.), the
power supply of the machine has to be di-
sconnected from the mains
(disconnect power plug) !
High--voltage electrical current can be fatal!
Only connect the machine to power supplies
equipped with a ground fault circuit brea-
ker!. Connections with power lines
need to be protected from splash water!
Only suitably knowledgeable, qualified pro-
fessional electricians may perform work on
any electrical parts of the system.
Risk of poisoning due to harmful substan-
ces at the workplace!
Eating, drinking and smoking at the work-
place is not permitted. Always eat in break
rooms or canteen areas!
After completing the work, thoroughly clean
yourself!
A general inspection of the machine must be
conducted before starting up the machine.
Particular attention should be paid to dama-
ged or loose components, and wear.
The machine may only be put into operation in
perfect technical condition.
Adding to or modifying the machine in any
way that could compromise operating safety
is prohibited!
Cleaning and maintenance may be done
only by trained personnel.
Maintenance needs to be conducted accor-
ding to the operation manual.
Do not use high pressure cleaners to clean
the machine!
Do not operate the machine in areas where
there is risk of explosion or where flamma-
ble materials are present.