Installation 11
AV200pro
Single-phase connection
Three-phase connection
In general, connection of the AV200pro to one phase is adequate, even for
communicating over multiple phases. To optimise the data transmission,
however, we recommend the three-phase connection.
���
After installing the protective cover, the AV200pro can be connected via
Ethernet to the desired network device (e.g. MUC, Internet access
device).
As soon as at least one other HomePlug adapter has been connected and
plugged into the mains supply, a HomePlug network is set up. Secure the
HomePlug network against unauthorised access by using the encryption but-
ton. For information on how to proceed, refer to Chapter 'Configuring the
Fig. 4