SCHÜTTE Cesari, Installation Instructions Manual

Page: 107 / 161

ý9 ü
V D D
or Please check Troubleshooting
Buttock shower / lady shower
The water pressure is too low.
The water filter in the hose
connection is dirty.
Clean the water filter.
The water inlet hos.e is
kinked.
Remove the kink in the water
hose.
Please contact customer
service.
The water temperature is too
low. The water temperature is set
to level 0 or 1*. Set the water temperature to
level 2, 3, 4 or 5*.
The water temperature is too
high. The water temperature is set
to level 5*. Set the water temperature to
level 1, 2, 3 or 4*.
The water jet suddenly
interrupts.
The shower function switch-
es off automatically after 3
minutes.
Normal function, no trouble-
shooting necessary.
Water drips from the retract-
ed shower arm.
The shower arm is automat-
ically cleaned before and
after use.
Normal function, no trouble-
shooting necessary.
Connect to hot water pipe.
Check if the hot water pipe is
connected. Must be connected to cold
water supply.
Warm air dyer
No function.
The user was not detected
by the seat sensor.
Change your sitting position.
Temperature of the hot air
dryer is too cold. The water temperature is set
to level 1.* Set the water temperature to
level 2, 3, 4 or 5*.
Temperature of the hot air
dryer is too hot. The water temperature is set
to level 5.* Set the water temperature to
level 1, 2, 3 or 4*.
Odour extraction
No or reduced function.
Activated carbon filter is
blocked. Replace the activated carbon
filter.
Odour extraction makes
unusual noises. Activated carbon filter is
blocked. Replace the activated carbon
filter.
* Setting instructions: 1 = Low level — 5 = High level