SHIPMENT
Pos.
Quantity
Solo | Twin
Item
1
1 | 1
Heat press
2
0 | 1
Base plate
3
0 | 3
Intermediate frame
4
0 | 2
Star grip nut
5
0 | 1
Textile catcher
6
0 | 1
Trolley
7
1 | 2
Guide rail
3
UNPACKING & CHECKING SHIPMENT
1*
Cut open the transport straps for the base plate
(pos 2) and the textile catcher (5).
ATTENTION: Parts may tilt and they are
heavy!
Lean both part carefully against a wall.
Remove star grip nuts (4) from the base plate (2)
and take the three intermediate frames (3) from the
thread bars. Put everything aside.
2
Carefully pull the trolley* (6) and the guide rail(s)
(7) out of the clearance.
3
Lift the heat press (1) from the pallet as indicated
and put it into its position.
ATTENTION: The varnished surface is slippery.
7
1 | 2
Guide rail
8
1 | 1
Instruments box no 1
9
0 | 1
Instruments box no 2
10
2 | 4
Stand
-
Various screws and washers
-
1 | 1
Carbon pin with spring
-
1 | 1
Open end wrench
size 14, 17, 24 & 36 mm
-
1 | 1
Allen wrench size 8 mm
-
1 | 1
Spirit level
- 7 -
ATTENTION: The varnished surface is slippery.
Use rubber elements on top of the fork of the lift
truck!
Make sure to provide for sufficient space to work
and put up racks. Look at chapter “11 Technical
data” to find out more about the individual
measurements and the minimum distances (X&Y)
to be kept to surrounding walls, shelves, etc.
4
Unpack the remaining components on the pallet
and check scope of delivery.
* Only TWIN-Version
