4.3
MOUNTING TEXTILE CATCHER
(Only TWIN-version)
4.4
BASE PLATE MOUNTING /
HEIGHT ADJUSTMENT
washer
The intermediate frames serve to adapt the space between work and heat platen according to
the thickness of the material to be printed.
(See section „6.1 Base plate height adjustment“)
The following description shows the assembly. If you need to adapt the height later during
operating the heat press just follow the instructions in a reverse order.
ASSEMBLY:
Put the three intermediate frames on top of one another onto the textile catcher. The nuts
serve to hit the center and must face downwards. Now place the base plate with the thread
bars facing downwards on the uppermost intermediate frame.
TIPP: Two people hold the base plate while another person inserts.
Finally screw the star grip nuts and washer from below onto the thread bars and tighten them.
Screw the textile catcher firmly to the trolley (washer).
- 11 -
washer
Star grip nut +
washer
Nuts down
Handles facing
the front
Heavy
