Assembly
03.00|WDP-5X |en
27
Fastening and connection
WDP-5X-BM 99-60
The WDP-5X-BM 99-60 base module is secured on the machine
table by two or four M12 screws and nuts for T-slots suitable for
the machine table. It can be mounted on thread bore hole grid
plates with tapped holes M16 with fitting seats Ø24 H6/H7 and
grid spacings of 50 mm. To do so, the base module is screwed on
at a diagonal distance of 141.42 mm using the grid plate as
orientation.
Four M12 screws and 2 M16 screws with 2 washers are included in
the scope of delivery. The nuts for T-slots are not included in the
scope of delivery of the clamping system.
For machine tables with T-slots, various center hole distances are
available. Alternatively, the clamping system can be secured using
two or four cylindrical clamp blanks BRR 50 (see chapter
"Accessories"
). There are slots on the bottom of
the clamping system to mount loose T-nuts in order to align the
clamping stations to the machine table slots.
The clamping system can be positioned on machine tables with
hole pattern bore holes or machine tables with T-slots for screw
connection via the central bore hole in the base.
Assembly on grid plates
With sleeve, type: HUEØ24/Ø25 (Accessory ID: 0471632) for
alignment on machine tables with hole pattern bore holes.
(Illustration "Mounting the WDP-5X-BM 99-60 on grid plates")
Assembly on T-groove table
With alignment element, type: ARE 25 (Accessory ID: 1319098) for
alignment on machine tables with T-grooves (Illustration
"Mounting the WDP-5X-BM 99-60 on T-groove table").
The WDP-5X-BM 99-60 base module allows further change
components of the modular system to be adapted to the
workpiece direct clamping. The change interface of the clamping
system has a central connection screw for clamping an adaptable
stacking module or a workpiece direct clamping or compensation
module.
The WDP-5X-BM 99-60 basic module has three air supply
connections G 1/8". The air supply is intended to supply a VERO-S
workpiece direct clamping module or a WDP-5X compensation
module with pneumatic actuation. The unlocking connection and
5.3
5.3.1
