Basic safety instructions
8
04.00|1400904 NSP 140, NSP-S 140 |en-US
Notes on particular risks
This product may pose a danger to persons and property if, for
example:
•
it is not used as intended;
•
it is not installed or maintained properly;
•
the safety and installation instructions, local applicable safety
and accident prevention regulations or the EC Machinery
Directive are not observed.
WARNING
Risk of injury due to falling parts when setting up, dismantling,
and transporting the quick-change pallet system.
Parts that have not been properly secured can come loose and
fall down.
•
Use suitable lifting equipment and means of transport.
•
When transporting, stay clear of the danger zone.
•
Wear personal protective equipment.
WARNING
Risk of injury to the operating personnel when transporting the
quick-change pallet system with the clamping ring axis in a
horizontal position, or during overhead application as a result of
the device or pallet falling down.
•
Use a crane or a transport truck when transporting.
•
During horizontal or overhead applications, the device or
pallet must be secured before loosening to prevent it from
falling.
WARNING
The system clamps using spring force. Risk of injury due to parts
automatically moving to their end positions following actuation
of an "emergency stop" or after switching off the power supply.
•
Wait for the system to shut down completely.
•
Do not reach into the clamping module.
2.3
