Basic safety notes
8
02|NSE-M plus 138 |en
Holding force and screw strength
The holding force of the System is essentially limited by the
strength of the screwed connections with which the clamping pin
is connected to the pallet or device. On this basis fastening
screws of the property class 12.9 are to be used only.
Only original SCHUNK Clamping-Pins are to be used.
When the clamping pin is used in the customer’s own assembly
device, the customer is to provide for a sufficiently dimensioned
tap and satisfactory strength of the fastening material.
Constructional changes, attachments, or modifications
Additional threads, bore holes or attachments which are not
supplied as accessories by SCHUNK may affect safety. They may
only be applied after obtaining the prior consent of SCHUNK.
Personnel qualification
The Quick Change Pallet System must only be installed, removed,
started up, operated and serviced by qualified specialist personnel
with the relevant safety training.
All persons charged with operating, maintaining and servicing this
Quick Change Pallet System must have access to the operating
manual, especially the chapter "Basic safety notes". We
recommend that the operator creates in-house safety operating
instructions.
Trainees may work on machines and technical equipment in which
a Quick Change Pallet System is installed provided that they are
supervised at all times by qualified specialist personnel.
2.4.1
2.4.2
2.5
