Basic safety notes
02|NSE-M plus 138 |en
7
WARNING
Risk of injury due to falling down of the fixture, pallet or
workpiece due to a insecure force connection at the clamping
area.
It is absolutely necessary to lock the clamping system with the
recommended torque to establish the force connection in the
clamping area.
The spanner wrench grip must not be extended in order to
actuate the drive.
CAUTION
During manual loading and unloading, risk of crushing of limbs
due to too large gaps between moving parts and during the
chucking operation.
Do not touch in the mounting area of the clamping pin.
Work with the smallest possible clamping and opening strokes.
Use loading aids.
Wear protective gloves.
Instructions for safe operation
The product may pose a danger to persons (risk of injury) and
property if, for example:
• it is used other than as intended;
• it is not installed or maintained properly;
• the safety and installation instructions, the safety and accident
prevention regulations valid at the usage site or the EC
Machinery Directive are not observed.
Maintenance instructions
The maintenance and servicing intervals must always be complied
with. The intervals indicated refer to a standard working
environment. Operating the gripper in an environment in which it
is subjected to abrasive dusts or corrosive and/or aggressive
vapours and/or liquids requires the prior consent of SCHUNK.
Safety during assembly and maintenance
During assembly, connection, setting, commissioning and testing,
it is important to eliminate the possibility of the fitter or any other
persons accidentally activating the system.
Refrain from all work that could threaten safety.
2.4
