SCHUNK TANDEM KSH plus, Assembly And Operating Manual

Page: 6 / 49

General
6 05.00|0489065 KSH plus, KSH-LH plus, KSH-F plus |en
Applicable documents
• General terms of business *
• Catalog data sheet of the purchased product *
The documents marked with an asterisk (*) can be downloaded on
our homepage schunk.com
Sizes
This operating manual applies to the following sizes:
• KSH plus 64, 100, 140, 160
• KSH-LH plus 64, 100, 140, 160, 250
• KSP-H plus 64, 100, 140, 160
Warranty
The warranty period is 24 months after delivery date from factory
or 500 000 cycles*, if it is used as intended, under the following
conditions:
• Observe the applicable documents,
(

1.1.2, Page 6)
• Observe the ambient conditions and operating conditions,
(

2.6, Page 8)
• Observance of the specified care and maintenance instructions
(

8, Page 26)
Parts touching the workpiece and wear parts are not included in
the warranty.
* A cycle consists of a complete clamping process ("Open" and
"Close").
Scope of Delivery
Clamping block
KSH plus or KSH-LH plus or KSH-F plus
(without top jaws)
ACCESSORY KIT:
(for contents, see sealing kit and parts list) (

9.1, Page 33)
1.1.2
1.1.3
1.2
1.3