Control of proper function
24
05.00|0489065 KSH plus, KSH-LH plus, KSH-F plus |en
Control of proper function
• Test to make sure the TANDEM clamping block is functioning
properly before putting it into operation. Make sure there are
no leaks in the line system.
• If the clamping system is involved in a collision, it must be
tested to see if it is still functioning properly before using it
again. Only use original SCHUNK spare parts when replacing
damaged parts.
• Visually inspect the clamping block at least once per shift for
visible damage and defects.
• Renew the chuck jaw mounting bolts if there are signs of wear
or damage. Only use screws with a quality of 12.9.
6
