Maintenance and care
• Remove screws (64) and take off the cover
strip (8).
• Remove screws (66) and take off the guide
strip (6).
• Variant "PM" also includes a compression
spring (27), O-ring (43), sphere (24) and O-
ring (42)
• Remove the screw (69).
• Remove chuck piston (3) and base jaws (2).
In the case of the PM variant, note that the
monitoring elements can fall off when the
base jaws are removed.
Additionally for the KSF3-F variant:
Remove screw (68). Pull out the positioning
bolt (10) via its extraction thread with a screw
as far as the stop.
Pull the base jaw (9) out of the housing.
Variant "PM" also includes the O-ring (44).
33
05.00 | KSF3, KSF3-LH, KSF3-F | TANDEM Clamping Force Block | en | 1467140
