SCHUNK SVP-Mini auto Assembly And Operating Manual Download Page 48

Page: 48 / 52

Operation

03.00|Clamping device SVP-Mini auto/SVP-RM auto|en

Replacing the battery

1 Push left and right unlocking button simultaneously and remove

the battery (1) through the front side of the pump (2).

2 Move the recharged battery into the pump (2) until it clicks into

place.

Actions after the usage

Cleaning

• Clean the intermediate sleeve in the clamping unit.
• Clean clamping diameter in the polygonal jaw chuck. Suitable

tube brushes are available as accessory:

(



1.4, Page 7)

Storage

• Store the TRIBOS clamping device in unpressurised condition.
• Slightly oil the intermediate sleeve and the housing of the clamp-

ing unit for storage.

• Cover the pump. A bag is available as accessory:

(



1.4, Page 7)

6.6.2

6.7

Summary of Contents for SVP-Mini auto





















































Search results

Summary of Contents for SVP-Mini auto

Reviews:

Related manuals for SVP-Mini auto

Brands by name

Popular brands

SCHUNK SVP-Mini auto, Assembly And Operating Manual

Search results

Summary of Contents for SVP-Mini auto

Reviews:

Related manuals for SVP-Mini auto

Brands by name

Popular brands