manualshive.com logo in svg

SCHUNK SVH, Assembly And Operating Manual, Page: 22 / 32

Share
Download
SCHUNK SVH Assembly And Operating Manual Download Page 22

Assembly and installation

22

02.00 | SVH | Assembly and Operating Manual | en | 389734

Ø

Disconnect the connection plug of the external network device.

Ø

Open the clamping ring on the flat changing system on the
assembly board.

Ø

Place the wrist of the 5‐finger gripping hand in the flat changing
system so that the centering pin aligns with the bore hole.

Ø

Tighten the clamping screws on the clamping ring.

Ø

Plug the network cable of the external computer into the
Ethernet interface on the assembly board.

Ø

Switch the toggle switch on the assembly board to the
"Ethernet" position.

Ø

Plug the external network device into the connection on the
assembly board.

Ø

Make sure that the 5‐finger gripping hand can move freely.

Ø

Switch the illuminated ON/OFF push button to "ON".

✓

The single-board computer in the assembly board starts up.
The 5‐finger gripping hand performs a reset cycle to detect
the end stops for the fingers.

Powering down

Ø

Switch the illuminated ON/OFF push button to "OFF".

Summary of Contents for SVH

































Reviews:

No comments