Assembly and installation
02.00 | SVH | Assembly and Operating Manual | en | 389734
19
5 Assembly and installation
WARNING
Risk of injury when the machine/system moves unexpectedly!
Switch off power supply.
NOTE
Depending on the application, it can be useful to perform basic
configuration steps before the mechanical installation.
Recommended tool: hexagon socket wrench, size 5
NOTICE
Risk of damage when using screws that are too long!
•
Observe the maximum depth of engagement permitted for
the mounting screws.
NOTICE
Risk of damage when using unsuitable connecting elements!
•
SCHUNK recommends using SCHUNK connecting elements.
Check the flatness of the bolting surface
The values refer to the entire bolting surface.
NOTICE
Risk of operational malfunction due to torn or pinched lines!
If electrical lines are too short or installed incorrectly, they may
become pinched or torn by the movement of the module.
•
Factor in operating movements when connecting the module.
NOTICE
Risk of operational malfunction due to short circuit or incorrect
connections!
•
Before connecting, ensure that the electrical lines are de-
energized.
•
Be sure to distribute the clamps correctly.
