Maintenance and care
04/STM-560V/en/2010-12-10/SW
63
11
Maintenance and care
11.1
Maintenance and lubrication intervals
DANGER
Risk of fatal injuries due to electric shock
If the electrical connections are released from the live module,
arcing may be the result.
Switch off the energy supply.
Only have work on the module performed by appropriately
trained specialist personnel.
NOTICE
If the operating temperature in the motor's winding exceeds
60° C, the lubricants will harden faster.
Lubrication and maintenance works have to be carried out
more often.
We recommend that maintenance and seal replacement is done
by SCHUNK because the rotor must be aligned and assembled
with an assembly device.
Type
STM 560V
Bearing lubrication Interval [h]
20.000
Visual inspection [h]
2.500
Table 25
This information refers to the use of the STM under normal
operating and ambient conditions:
•
Clean workshop atmosphere
•
No splashing water
•
Small amounts of abrasive and process dust
11.2
Disassembly of the module
The module may only be disassembled and repaired by
SCHUNK. Non-compliance will invalidate the warranty.
Maintenance
intervals
