SCHUNK RST-P 060, Assembly And Operating Manual, Page: 31 / 40

Troubleshooting
02.01|RST-P 060 / 087|en 31
Cycle times are not reached?
Possible cause Corrective action
ACTUAL operating pressure does not equal
the TARGET rated operating pressure Check operating pressure
(

6, Page 11)
Compressed air lines are not installed opti-
mally. Check compressed air lines.
Inner diameter of the compressed air lines
are sufficiently large relative to the com-
pressed air consumption
Compressed air lines between module and
control valve shoud be kept as short as poss-
ible.
Flow rate of valve is sufficiently large rela-
tive to the compressed air consumption.
Dampening not ideally set Readjust damper setting
(

7.5, Page 18)
9.6