Assembly and settings
18
02.01|RST-P 060 / 087|en
Setting the swiveling time
See the catalog data for data on the swiveling time.
The swiveling time is ideally set with exhaust air throttles.
These must be provided by the customer
Setting the end position dampers
In the version for left-hand and right-hand operation (L / R), a hy-
draulic shock absorber is installed in the lifting stroke and an elas-
tomer damper for dampening the reverse stroke.
In the version for operation on both sides, 2 shock absorbers are
installed.
Fig. 7
End position dampers setting; e.g. RST-P...-R
NOTICE
Back stop (17) and dampers (45) do not serve as end stop for the
drive, but only for dampening.
The drive piston must stop at the respective end plate, otherwise
the module cannot lock correctly and continue pulsing.
•
Always set back the back stop (17) and dampers (45) to the
extent that the module performs the full angle stroke (90°,
60°, 45° or 30°) and can be pulsed on.
7.4
7.5
Summary of Contents for RST-P 060
Page 38: ...Notes 38 02 01 RST P 060 087 en Notes ...
Page 40: ...40 02 01 RST P 060 087 en ...