SCHUNK RST-P 060, Assembly And Operating Manual, Page: 28 / 40

Handling and operation
28 02.01|RST-P 060 / 087|en
Position of the position numbers
(

11, Page 34)
1 Disassemble cover plate (-(13) on version "R" and "B"; - (14)
on version "L")
2 If present, take out parts of the stroke reduction and insert
parts from the conversion kit
(

8.2.1, Page 21) .
3 Assemble cover plate (13/14).
4 Adjust the shock absorber (45)
(

7.5, Page 18) .
5 Tighten the 4 screws (51).
Position of the position numbers
(

11, Page 34)
1 Disassemble cover plate (-(13) on version "R" and "B"; - (14)
on version "L"). This data applies to factory-assembled units. If
the customer converted the operating mode (L / R / B), the
stroke reductions may be under the other cover plate.
2 If present, take out parts of the stroke reduction and insert
parts from the conversion
(

8.2.1, Page 21) kit. Use tool, as
required (
☞
previous diagram).
3 Assemble cover plate (13/14).
4 Adjust the shock absorber (45)
(

7.5, Page 18) .
5 Tighten the 4 screws (51).
RST-P-060
pitch 4 / 6 / 12
RST-P-087
pitch 4 / 6 / 12